Difference between revisions of "Korg nanoKONTROL2"
Boxofstops (Talk | contribs) |
Boxofstops (Talk | contribs) |
||
| Line 8: | Line 8: | ||
* It can turn on the lights on the device, to show which [[Stop|stops]], [[Coupler|couplers]] or [[Combination|combinations]] are playing | * It can turn on the lights on the device, to show which [[Stop|stops]], [[Coupler|couplers]] or [[Combination|combinations]] are playing | ||
* Understand the layout of the buttons, sliders and knobs | * Understand the layout of the buttons, sliders and knobs | ||
| + | |||
| + | __TOC__ | ||
| + | |||
| + | [[File:NanoKONTROL2 black.png|500px]] | ||
| + | |||
| + | == Assigning buttons == | ||
| + | |||
| + | Because there are typically more [[Stop|stops]], [[Coupler|couplers]] and [[Combination|combinations]] in a [[Registration]] than there are buttons on the nanoKONTROL2, Box Of Stops doesn't try to auto-arrange these in the same way it does for the [[Akai APC Mini]]. | ||
| + | |||
| + | To assign a button on the nanoKONTROL2, just press that button while [[Trigger#Adding a trigger to a control|adding a trigger]] to an stop, coupler or combination. Once you OK the screen, that button will start to illuminate when the control is playing. | ||
| + | |||
| + | Note that not all buttons on the nanoKONTROL2 have lights behind them. The picture above shows all the available lights illuminated in Red. | ||
Revision as of 15:47, 8 April 2017
Under Construction
Support for the Korg nanoKONTROL2 is planned with the next version of Box Of Stops. The rest of this page is in preparation for that release...
Box Of Stops comes with built-in support for the Korg nanoKONTROL2. This means:
- It can turn on the lights on the device, to show which stops, couplers or combinations are playing
- Understand the layout of the buttons, sliders and knobs
Contents
Assigning buttons
Because there are typically more stops, couplers and combinations in a Registration than there are buttons on the nanoKONTROL2, Box Of Stops doesn't try to auto-arrange these in the same way it does for the Akai APC Mini.
To assign a button on the nanoKONTROL2, just press that button while adding a trigger to an stop, coupler or combination. Once you OK the screen, that button will start to illuminate when the control is playing.
Note that not all buttons on the nanoKONTROL2 have lights behind them. The picture above shows all the available lights illuminated in Red.
