Status Board

Page under construction

The Status Board from The Pi Hut is just about the simplest and most affordable controller available for Box Of Stops.

While it was clearly not designed with this in mind, the combination of five input buttons (available cheaply separately), each with two related LEDs is ideal to drive Box Of Stops. Each input button can control any Stop, Coupler or Combination, and the LEDs show which are active.

Configuring

To enable a Status Board in Box Of Stops, please edit the Application properties, and set the gpio.board value to StatusBoard :

gpio.board = StatusBoard

Assigning buttons

To assign a button on the Status Button, just press that button while adding a trigger to any stop, coupler or combination. Once you OK the screen, the red LED for that button will light, to indicate the control is available.

Then press the chosen button to toggle its related control - the green LED will show while it is playing, and the red LED while it is off.

Timeout

After 10 minutes of inactivity, Box Of Stops will automatically timeout the lights on the Status Board.

It will wake up again when activity is next detected. This could be anything, e.g. a button on the Status Board, or a note being pressed on a keyboard.

If you wish to change the 10 minute default, please look for the midi.timeout.minutes value in Application properties.